Power Enhancement under Partial Shading Condition Using a Two-Step Optimal PV Array Reconfiguration

Abstract

Under partial shading conditions, photovoltaic (PV) arrays are subjected to different irradiance levels caused by nonuniform shading. As a result, a mismatch between the modules, a reduction in the power generated, and the hotspot phenomenon will be observed. One method to reduce mismatch losses is to reconfigure the total-cross-tied (TCT) array in dynamic and static forms, where improved performance can be achieved through more efficient shading distribution thanks to increased dimensions. However, the increase in dimensions leads to the complexity of wiring and installation in static reconfiguration and the large number of switches and sensors required in dynamic reconfiguration. To rectify these problems, a two-step method is proposed in this paper. In the first step, the modules inside the PV array are divided into subarrays with wiring in static reconfiguration, rather than being wired as large-scale PV arrays. In the second step, an algorithm is developed for dynamic reconfiguration. The introduced algorithm searches for all possible connections and finally identifies the most optimal solution. As an advantage, this algorithm employs only the short-circuit current values of the subarray rows, which reduces the number of switches and sensors required in comparison to dynamic reconfiguration. Under 8 different partial shading patterns, simulations are conducted and results confirm that the proposed method outperforms the TCT array and statically modified TCT array in terms of power and mismatch losses. Among these, the highest power improvement is obtained with regard to the TCT array and statically modified TCT array under the fourth and eighth shading patterns, respectively. © 2021 Mohamad Hossien Nahidan et al.