PCIM Europe Conference Proceedings (21913358)2024pp. 74-83
Power cycling is typically performed by periodically self-heating a power device using a DC current. This paper demonstrates a technique to boost the heating power to shorten the heating phase, by the addition of switching loss. This power cycling technique is demonstrated on 190 mΩ, 600 V Gallium Nitride (GaN) discrete devices, where it achieves 240,000 thermal cycles per week with a junction temperature swing ∆TJ of 100°C, and where the device remains integrated in a switching converter. The device under test is heated rapidly from 30°C to 130°C in 0.5 s, by hard-switching at 1 MHz, at rated current and 400 V. An optimized thermal path cools the junction back to 30°C in 2 s. The junction temperature is closed-loop controlled to maintain an approximately constant temperature swing. This requires junction temperature sensing with low ms-scale latency, implemented here using peak turn-on di/dt as the junction temperature indicator. The inferred temperature is fed into a control system that governs the heating and cooling durations. The resulting closed-loop-controlled heating time is shown to be a sensitive real-time indicator of device change. The paper discusses the practicality of temperature calibration methods, in light of temperature-sensitive electrical parameters’ known drift and sensitivity to bias temperature instability, and the problem of self-heating during calibration. Experimental results show one GaN device surviving 400,000 cycles with a ∆TJ of 102°C with no apparent thermal degradation, and another GaN device cycling at a ∆TJ of 136°C, whose heating duration reduces from 500 to 10 ms over the course of 30,000 cycles, indicating an apparent degradation of the device’s thermal properties. © VDE VERLAG GMBH · Berlin · Offenbach.
