Publication Date: 2023
Scientific Reports (20452322)13(1)
Runaway electrons are a notable phenomenon occurring during the operation of a tokamak. Proper material selection for the tokamak's first wall structure and plasma facing components, particularly in large sizes tokamaks like ITER and DEMO, is crucial due to the energy deposition of runaway electrons on plasma facing components during collision events, resulting in severe heat transfer and material damage in the form of melting, corrosion, and fracture. These runaway electrons also contribute to the production of photoneutrons through (γ, n) nuclear reactions, lead to material activation and require remote handling. In this study, using a Monte Carlo code and simulating the collision of runaway electrons with a tungsten target exposed to their radiation, the electron transport is investigated, and the energy deposition spectrum resulting from these collisions on the target is analyzed. The influence of incident angle and magnetic field on the energy deposition spectrum and the energy deposition per particle in the target is examined. With an increase in the incident angle of incoming electrons, the amount of energy deposited in the target rises and the energy deposition spectrum broadens. Moreover, applying a magnetic field, results the most significant increase in energy deposition for electrons with energies below 1 MeV in the tangential radiation case. The energy deposition spectrum resulting from each collision event in these interactions is determined. For electrons with energies below 5 MeV, multiple scattering and ionization processes are the primary contributors to energy deposition in the target. However, as the incident electron energy increases, the significance of multiple scattering and ionization diminishes, and the bremsstrahlung process becomes the most effective reaction in energy deposition. The energy deposition profile of electrons in the tungsten target indicates that higher incident electron energies lead to a shift of the maximum energy deposition location towards the inner layers of the target, and the energy deposition peak broadens. Analyzing the electrons transport inside the tungsten target reveals that a substantial portion of electrons with energies of 50–100 MeV passes through the wall and may exit from the back surface, potentially causing damage to equipment behind the tungsten wall. Additionally, secondary products of the reaction, such as photons, secondary electrons, and neutrons and their energy profiles are thoroughly studied. These secondary products can penetrate the target and activate materials in the equipment behind the plasma-facing components. For primary electrons below 1 MeV hitting tungsten, reflection process is significant. Analysis of primary and secondary runaway electrons in the tokamak's tungsten wall shows that electrons with energies of 0.1, 0.2, and 0.5 MeV predominantly interact within a first 0.1 mm layer, without passing through it. The secondary electrons can escape the tungsten target and impact other components, which making them an important consideration in runaway electron collisions with the tokamak wall. Produced photons, as one of the secondary products, also linearly increase with the rising energy of primary electrons. Also, the photoneutrons are produced only when runaway electrons with energies of 10 MeV and above collide with the target. These secondary products can penetrate the target and activate materials in the equipment behind the plasma-facing components. © 2023, The Author(s).
