Menu
The Dean’s Office A faculty is one of the main academic units within a university, dedicated to education, research, and intellectual development. It provides a supportive environment for learning and growth, offering classrooms, workshops, laboratories, and research spaces for students and professors. Experienced faculty members play a key role in guiding students academically and professionally, using modern teaching methods to foster progress. Students have the opportunity to strengthen their individual and collaborative skills while pursuing their academic goals. Alongside educational programs, cultural, social, and sports activities help create a balanced student life. Faculties also organize conferences, academic meetings, and collaborate with research centers and industries, building strong connections between the university and society. These connections expose students to real-world challenges and prepare them for future careers. Educational and research facilities are designed to meet current academic needs and encourage innovation and creativity. Ultimately, a faculty is a place where knowledge, experience, and motivation come together to shape a capable, informed, and responsible generation.
Departments
profile
more...
Top researchers
Research Output
Articles
Conference: 1 December 2014
Chemical Engineering and Technology (09307516) 37(12)pp. 2175-2184
A rate-based mathematical model was developed for the reactive absorption of H2S in NaOH, with NaOCl or H2O2 as the chemical oxidant solutions in a packed column. A modified mass transfer coefficient in the gas phase was obtained by genetic algorithm and implemented in the model to correct the assumption of instantaneous reactions. The effects of different operating variables including the inlet H2S concentration, inlet gas mass flux, initial NaOH, concentrations of the chemical oxidants in the scrubbing solutions, and liquid-to-gas ratio on the H2S removal efficiency were studied. A genetic algorithm was employed to optimize the operating variables in order to obtain maximum removal efficiency of H2S. The model results were in good agreement with the experimental data. A modified rate-based mathematical model was developed and evaluated in order to predict the removal efficiency of H2S in a packed-bed column with NaOH and chemical oxidant solutions as absorbents. Results of the validated model were adapted to a genetic algorithm to calculate optimal operating variables. Among the most effective operation parameters the initial pH of the alkaline solution was determined. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
This paper presents a new method for coordinately tuning the parameters of UPFC controller and power system stabilizer (PSS) as well as determining the PSS location to enhance the stability of power system by using a new hybrid particle swarm optimization based co-evolutionary cultural algorithm, so called culture-PSO-co evolutionary (CPCE). Nonlinear simulations are implemented on the IEEE 39-bus power system. The results imply the effectiveness of the proposed method for damping out power system oscillations. © 2016 IEEE.
Etahadtavakol, M. ,
Ng e.y.k., ,
Lucas, C. ,
Ataei, M. Publication Date: 0
pp. 255-274
Publication Date: 0
pp. 155-160
A new control scheme, based on Artificial Neuro-Fuzzy Inference System (ANFIS) is used to design a robust Proportional Integral Derivative (PID) controller for Load Frequency Control (LFC). The controller algorithm is trained by the results of off-line studies obtained by using particle swarm optimization. The controller gains are optimized and updated in real-time according to load and parameters variations. Simulation results of this method on a multi-machine system in comparison with conventional fuzzy controller show the satisfactory results, especially where the parameters of the system change. © 2019 ICAI 2015 - WORLDCOMP 2015. All rights reserved.
Publication Date: 0
pp. 429-463
Most of the weight of the proton exchange membrane (PEM) fuel cell stack is in the bipolar plates. The main function of bipolar plates is uniform distribution of gas reactants as well as distribution of cooling fluid (water or air) inside the fuel cell. Therefore, the plate design and the characteristics of the gas and cooling channels inside them are essential to the operation of the PEM. Although reactive gas channels and cooling channels perform separately, there are many similarities between them. For example, gas channels should be designed so that distribution of reactive gases on the electrode surfaces is uniform. Also, cooling channels should be designed so that temperature distribution inside the fuel cell is uniform. Further, pressure drop of reactive gases inside the gas channels and the fluid inside the cooling channels must be minimal. In this chapter, initially the characteristics, functions and making materials of bipolar plates along with the to make channels inside of them are investigated. Afterwards, gas channels, cooling channels and effects of the shape and size of channels on the PEM fuel cell performance are studied. Finally, different configurations of gas and cooling channel with emphasizing on the new configurations of these channel are researched simultaneously. © 2022 Elsevier Inc. All rights reserved.
Publication Date: 0
pp. 742-747
In this paper, a saturated PD based Fault Tolerant Control is proposed for a quadrotor suffering a severe fault in one of its actuators, on top of a new control scheme assuming the fault has been already detected by the system. Whenever a severe fault occurs in system, the PD control is reconfigured by adding relevant trirotor control equations to the control laws. To tune the optimal parameters of the controllers, a Particle Swarm Optimization algorithm (PSO) is used. The stability of the upgraded PD is proved by using Lyapunov theorem. Simulation Results with some induced disturbance demonstrated the effectiveness of the proposed controller in controlling the damaged quadrotor until it finishes its path. © 2017 IEEE.
Publication Date: 0
IEEE Transactions on Vehicular Technology (00189545) 55pp. 1725-1730
Antilock braking systems (ABS) have been developed to improve vehicle control during sudden braking especially on slippery road surfaces. The objective of such control is to increase wheel tractive force in the desired direction while maintaining adequate vehicle stability and steerability and also reducing the vehicle stopping distance. In this paper, an optimized Fuzzy controller is proposed for antilock braking systems. The objective function is defined to maintain wheel slip to a desired level so that maximum wheel tractive force and maximum vehicle deceleration are obtained. All components of fuzzy system are optimized using genetic algorithms. The error based global optimization approach is used for fast convergence near optimum point. Simulation results show fast convergence and good performance of the controller for different road conditions. ©2005 IEEE.
Publication Date: 0
pp. 211-216
This paper proposes an active disturbance rejection control (ADRC) method based on generalized proportional integral (GPI) observer to control of a biped robot while considering its complicated structure and possible disturbances. These observers are used to estimate time-varying disturbances and possible uncertainties. Generally, implying GPI observer on robotic systems is accompanied by a PD-controller in feedback, which is not efficient enough due to abrupt velocity changes of the biped in impact phase, and consequently, a higher level of input torque is required. Thus, applying the back-stepping technique to the mentioned method is suggested. In this study, a two-nested control loop is designed for a 3D biped robot. The back-stepping method with a GPI observer is used in the inner control loop to improve the custom method. Joint trajectories are designed by an offline method and modified by an online method in the outer loop to maintain the stability of the biped. The efficiency of the proposed control strategy is depicted for the biped in the presence of time-varying disturbances through MATLAB simulation. © 2019 IEEE.
Anti-lock braking systems (ABS) have been developed to reduce tendency for wheel lock and improve vehicle control during sudden braking especially on slippery road surfaces. The objective of such control is to increase wheel tractive force in the desired direction while maintaining adequate vehicle stability and steerability and also reducing the vehicle stopping distance. In this paper, a genetic-fuzzy ABS controller is designed. The objective function is defined to maintain wheel slip to a desired level so that maximum wheel tractive force and maximum vehicle deceleration are obtained. All components of the fuzzy system that is Takagi-Sugeno-Kang (TSK) type are obtained using a genetic algorithm. Simulation results show very good performance of the controller for different road conditions. © 2005 IEEE.
Publication Date: 0
2pp. 1343-1352
The ultra-fast charging capability, distinct properties, fine performance and high capacity of nickel cadmium (Ni-Cd) and nickel metal hydride (Ni-MH) batteries along with their limited weight and size are very attractive for use in many applications including cordless and portable devices, emergency and standby power, telecommunication equipments, photovoltaic systems, electric vehicle, satellite and space craft and power plant supporting equipments. However, the limitation on their temperature requires a detail thermal analysis of these batteries. Thermal behavior of batteries are effected by their boundary conditions, type and construction, and more importantly by their chemical reaction. The purpose of this study is to investigate the effect of temperature on thermal behavior of the Ni-Cd and Ni-MH batteries. The governing equation is the transient and non-linear differential energy equation subjected to non linear radiation boundary conditions and source term. To solve the transient and non-linear governing differential energy equation a control volume based finite difference code is utilized. In formulation of the governing differential energy equation, the Ni-Cd and Ni-MH properties (K, C, ρ) are not constant and the chemical characteristic of the Ni-Cd and Ni-MH batteries, source term, vary with location and time. Calculated thermal characteristic of each battery is then compared to experimental results. The result shows that Ni-MH battery is thermally more suitable for space application and satellite. Copyright © 2004 by ASME.
more... 3004 University of Isfahan
Address: Isfahan, Azadi Square, University of Isfahan