Publication Date: 2024
Heliyon (24058440)10(5)
Background: During bone drilling, a common procedure in clinical surgeries, excessive heat generation and drilling force can cause damage to bone tissue, potentially leading to failure of implants and fixation screws or delayed healing. With this in mind, the aim of this study was to evaluate the efficiency of ultrasonic-assisted drilling compared to conventional drilling as a potential method for bone drilling. Methods: This study examined optimal drilling parameters based on previous findings and investigated both cortical and cancellous bone. In addition to evaluating drilling force and temperature elevation, the effects of these factors on osteonecrosis and micro-crack formation were explored in ultrasonic-assisted and conventional drilling through histopathological assessment and microscopic imaging. To this end, three drilling speeds and two drilling feed-rates were considered as variables in the in vitro experiments. Furthermore, numerical modeling provided insight into temperature distribution during the drilling process in both methods and compared three different vibration amplitudes. Results: Although temperature elevations were lower in the conventional drilling, ultrasonic-assisted drilling produced less drilling force. Additionally, the latter method resulted in smaller osteonecrosis regions and did not produce micro-cracks in cortical bone or structural damage in cancellous bone. Conclusions: Ultrasonic-assisted drilling, which caused less damage to bone tissue in both cortical and cancellous bone, was comparatively more advantageous. Notably, this study demonstrated that to determine the superiority of one method over the other, we cannot rely solely on temperature variation results. Instead, we must consider the cumulative effect of both temperature elevation and drilling force. © 2024 The Authors
Publication Date: 2023
International Urogynecology Journal (09373462)34(2)pp. 571-580
Introduction and hypothesis: This study aims to develop a fluid-structural interaction (FSI) method to pinpoint the effects of pressure changes inside the bladder and their impact on the supporting structure and the urethra mobility. Methods: A physiological model of the nulliparous female pelvis, including the organs, supportive structures, and urine, was developed based on magnetic resonance images. Soft tissues with nonlinear hyperelastic material characteristics were modeled. The Navier-Stokes equations governing the fluid flow within the computational domain (urine) were solved. The urine and soft tissue interactions were simulated by the FSI method. The vesical pressure and its impact on the urethral mobility and supportive structures were investigated during the Valsalva maneuver. Moreover, the simulation results were validated by comparing with a urodynamic test and other research. Results: The results demonstrated that the vesical pressure simulated by the FSI method could predict the nonlinear behavior of the urodynamic test pressure. The urethra retropubic bladder neck and the bladder neck-pubic bone angle changed 58.92% and -55.76%, respectively. The retropubic urethral length distance changed by -48.74%. The error compared to the statistical results of other research is < 5%. Conclusions: The total deformation and mobility of the urethra predicted by the FSI model were consistent with clinical observations in a subject. The urethra supports dependence on the tissues' mechanical properties, interaction between the tissues, and effect of urine fluid inside the bladder. This simulation effectively depicts the patterns of urethra mobility, which provides a better understanding of the behavior of the pelvic floor. © 2022, The International Urogynecological Association.
